Single Edge Contact (SEC)

Single Edge Contact (SEC):-

                                  Pentium- II\III chips are characterized by their single edge contact SEC cartridge design. The processor, along with several l2 cache chips, is maintained on a small circuit board (much like an oversized memory SIMM), which is than sealed in a metal and plastic cartridge. The cartridge is then plugged into the motherboard through an edge connector called slot, 1 that looks very to an adopter card slot.

Microprocessor Introduction: (continued)

Arithmetic and logic unit:

  It is part of CPU. ALU performs all the operations of arithmetic and logic are performed by ALU. The data on which any operation is to be taken is fed into the computer memory with the help of input devices. The data is then assigned to ALU for further operation. ALU may further be divided into two parts:
Arithmetic Unit
Logic Unit

Arithmetic Unit:

The arithmetic unit of ALU performs the fundamentals operations of arithmetic such as addition, subtraction, multiplication, and division.

Logic Unit:

 unit of ALU does all the operation of data involving between two values. The logical operations include the comparison between two numbers to define which number is greater, less equal or not equal to the number.

Control Unit:

CU is responsible for the execution of the program instruction given to the computer. The input and output devices also depend upon the CU.
It accepts data from the input devices and transfers it to the main memory. Then it transfers data from the main memory to ALU. In the end it sends the output either to the main memory or output devices.

Microprocessor Introduction:

Microprocessor Introduction:

A microprocessor is an integrated circuit that contains a complete CPU on a single chip. It is also called the brain of computer. The microprocessor is also called CPU. CPU is central component of pc. The processor performs calculations and processing for the pc. CPU interacts with main memory Ram and other components of the computer. CPU is used in microcomputers as a compulsory component.
As for as the working of the CPU is connected, it is divided into two units:

1. Arithmetic & logic unit (ALU)
2. Control unit (CU)

Microprocessor (Introduction to Computer Continued)

The Microprocessors:-

The Microprocessor is the brain of computer. A microprocessor is is an integrated circuit that contains a complete CPU on a single chip. It is simply called CPU. CPU is central component of computer. The processor performs the calculations and processing for the computer. There are 2 main units of a Computer Processor.
Arithmetic and Logic Unit
Control Unit

Arithmetic and Logic Unit:-
This Part of the CPU. All the operation of Arithmetic and logic are Performed by ALU. The data on which any operation is to be taken is fed to computer memory with the help of Input device. That is then assigned to ALU for further operations. ALU is actually combination of two units.
Arithmetic Unit
Logic Unit

Arithmetic Unit:-

The Arithmetic unit of ALU performs the fundamental operation of arithmetic such as addition, subtraction, multiplication and division.

Logic Unit:-

This unit of ALU does all the operation of data involving between two values. The logical operation include the comparison between two numbers to define which number is greater, less, equal or not equal to a number.

Control Unit:-

CU is responsible for the execution of the program instruction given to the computer.The Input and Output Devices also depend on the CU.
It accepts the data from input devices and transfer it to the main memory. Then it transfer data from the main memory to ALU. At the end it sends the output either to main memory or output devices.